Categories
Contact Us

Alite Co.,Ltd

Tel: +86-755-29515851/52/53

Fax: +86-755-29515852Ext.815

E-mail:info1@aliteled.com

Add:Building #7, Tongfucun Industrial Park, Dalang North Road ,Longhua New District, Shenzhen, China

Contact:Mr.Xie

Skype:info1@aliteled.com

Service Hotline
+86-755-29515851/52/53

News

Home > NewsContent

LED Tube Light The More Tiles Glow

Edit:Alite Co.,Ltd  Date:May 18, 2017

LED fluorescent Tubes specification models include: T4, T5, T8, T9 and T10. T represents the 'Tube', the logo is tubular; the digits behind T represent the diameter of the lamp. Each a 'T' is representing 1/8 inches that is 3.175mm.

LED fluorescent Tubes specification models include: T4, T5, T8, T9 and T10. T represents the 'Tube', the logo is tubular; the digits behind T represent the diameter of the lamp. Each a 'T' is representing 1/8 inches that is 3.175mm.


Theoretically, the finer the lamp efficiency is higher, LED Tube Light that is to say the same watt number of luminous more, at the same time, the thinner lamp is easy to conceal, use the occasion is more flexible. However, the finer the lamp start is harder, so the development of the T5 lamp must use electronic ballast to start. In order to save costs, T5, T4 are used in the form of miniature stent to sell, is the ballast contained in the miniature space in the stent, LED Tube Light the efficiency and quality of the ballast is generally not good, leading to the high efficiency lamp should be less than the common T8 lamp light, life also has discounts.


Inorganic photocatalyst LED Tube Light mainly include: nano-barium sulfate, calcium carbonate, silica and so on, these non-model optical diffusion agent from the microscopic point of view is a solid microsphere, the light can not penetrate the solid body, will affect the passage of a lot of light, only partially through refraction through the light, so the brightness or transmission. At present, the lamp shade requires light transmittance 50% above all can not choose inorganic optical diffusion agent.

Organic Light diffusion agent is mainly acrylic type, LED Tube Light styrene type, acrylic resin, such as the resin itself is transparent or translucent, the light of a large department can pass, using these optical diffusion agent material refractive index and substrate refractive index difference, the light has repeatedly refracted, through the substrate light becomes bright and gentle, LED Tube Light nd the influence of the material's transmittance is less, is to do the lamp shade and other optical materials very good choice.


From the above analysis, there are models of optical diffusion agent is PC, acrylic and other substrate lamp lamp shade materials, LED Tube Light the preferred diffusion agent. Because there are different types of optical diffusion agent, its material itself to light refractive index varies, so there will be a PC lamp shade diffuser, PMMA lampshade, such as optical diffusion agent different classifications.